Reset limit switch. Allow the unit to cool (approximately 15 minutes) before starting.
Inoperable motor.
Replace motor.
Loose motor connection.
Tighten motor connection.
Stripped drive gear.
Replace drive gear.
Unit will not heat up.
High limit switch tripped.
Reset limit switch. Using a pencil or pen, press the hollow portion of the 3/8" long brown, plastic stem located at the right-hand rear of the unit. Allow the unit to cool (approximately 15 minutes) before starting.
Inoperable power cord.
Replace power cord.
Inoperable power switch.
Replace power switch.
Loose connection on power switch.
Tighten power switch connections.
No power to unit.
Make sure power cord plugged into the unit and proper electrical receptacle.